Microphones

Microphones

Microphones

Microphones

ES943C

Cardioid Condenser Lavalier Microphone
Share

Details

The ES943C is intended to be worn on the clothing for excellent, unobtrusive sound pickup. The microphone's wide-range capability ensures clean, accurate reproduction with high intelligibility for speakers, singers and other performers. Its low-profile element provides a uniform cardioid polar pattern with 120º acceptance angle. It is equipped with an 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise. The microphone offers unsurpassed immunity from radio frequency interference thanks to Audio-Technica’s UniGuard® innovations.

  

 

    • Designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications
    • Small size and excellent response provide crisp, full-sounding voice pickup
    • Available interchangeable elements permit angle of acceptance from 100º to 360º
    • 55" (1.4 m) permanently attached miniature cable connects to AT8538 power module via TA3F-type connector
    • Requires 11V to 52V DC phantom power
    • Superior off-axis rejection for maximum gain before feedback
    • UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI) 
    • Integral UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
    • RoHS compliant—free from all substances specified in the EU directive on hazardous substances

 

 

Specifications

ELEMENT Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN Cardioid
FREQUENCY RESPONSE 30-20,000 Hz
LOW FREQUENCY ROLL-OFF 80 Hz, 18 dB/octave
OPEN CIRCUIT SENSITIVITY -40 dB (10.0 mV) re 1V at 1 Pa
IMPEDANCE 250Ω
MAXIMUM INPUT SOUND LEVEL 138 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (TYPICAL) 109 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO 65 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS 11-52V DC, 2 mA typical
SWITCH Flat, roll-off
WEIGHT (MICROPHONE) 5.5 g
WEIGHT (POWER MODULE) 81 g
DIMENSIONS (MICROPHONE) 27.5 mm (1.08") long, 8.4 mm (0.33") head diameter
DIMENSIONS (POWER MODULE) 92.9 mm (3.66") long, 18.9 mm (0.74") diameter
OUTPUT CONNECTOR (POWER MODULE) Integral 3-pin XLRM-type
CABLE 1.4 m (55") long (permanently attached to microphone), 2.2 mm (0.09") diameter, 2-conductor shielded cable, terminated with TA3F-type connector
ACCESSORIES FURNISHED AT8110 foam windscreen; AT8460 clothing clip; AT8538 power module; belt clip
AUDIO-TECHNICA CASE STYLE M28

Configurations

Graphs

Resources

Enquiry