Products Featured Products
Microphone Desk Stand with Dante™ Network Output
Equipped with the same Dante user switch capabilities as the ATND971a boundary mic, the ATND8677a desk stand allows Dante technology to be used with any phantom-powered condenser gooseneck microphone with a 3-pin XLRM-type output. The desk stand is designed for surface-mount applications such as high-quality sound reinforcement, conferencing, distance learning and other demanding sound pickup applications.
The sturdy metal base features a 3-pin XLRF-type input and Dante network output, enabling direct connection to the network via Ethernet cable. The desk stand’s touch-sensitive capacitive-type user switch with integral red/green LED status indicator permits advanced local and remote control. In Local mode, the switch mutes and unmutes the microphone: It can be set to toggle between live and muted audio (toggle on/off), to permit live audio only while the switch is pressed (press to talk), or to mute the audio while the switch is pressed (press to mute). In Remote mode, the switch can be used to trigger functions on compatible Dante-enabled devices, such as a video camera’s pan/tilt or a room’s lighting preset.
An integral 80 Hz low-cut UniSteep® filter provides easy switching from a flat frequency response to a low-end roll-off, while a three-position input gain level selector (+30 dB, +40 dB, +50 dB) permits trim adjustment to accommodate louder and softer voices. The desk stand also provides 12V DC phantom power, which can be switched off and on.
This latest “a” version also offers plug-and-play compatibility with AES67 networks, including those that utilize Livewire, RAVENNA and Q-LAN AoIP technologies, and increases the Dante Domain Manager features, adding role-based security, cross-subnet routing, SNMP alerts and more.
- Connects directly to network via Ethernet cable – no need for expensive audio cable or soldering
- Integrated user switch controls talk/mute in Local mode and triggers Dante-enabled devices in Remote mode
- 3-pin XLRF-type in for quick mounting of gooseneck microphone
- Red/green LED indicator
- Local or remote control of mic gain, low-cut filter, LED indicator and 12V phantom power
- Powered by network PoE
- Scalable across Dante’s 512 bidirectional audio channels
- UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
- Heavy die-cast case and non-slip silicone foam bottom pads minimize coupling of surface vibration to the microphone
- Plug-and-play compatibility with AES67 networks, including those that utilize Livewire, RAVENNA and Q-LAN AoIP technologies
- Increases Dante Domain Manager features, adding role-based security, cross-subnet routing, SNMP alerts and more
|Frequency Response||20 - 20,000 Hz|
|Maximum Input Sound Level||-10 dBu @ +30 dB gain / -20 dBu @ +40 dB gain / -30 dBu @ +50 dB gain|
|Low Frequency Roll Off||80 Hz, 18 dB/octave|
|Switches||Local Mode: Touch-sensitive capacitive-type user switch function: toggle (mute on power up), toggle (talk on power up), momentary on, momentary off; |
Low-cut filter: flat, roll-off;
Gain: +30 dB, +40 dB, +50 dB;
Phantom power: 12V DC, off
Remote Mode: Low-cut and Gain via third-party software*
|Signal-to-Noise Ratio||68 dB, 1 kHz at 1 Pa|
|Phantom Power Requirements||12V DC|
|Power Requirements||PoE IEEE802.3af standard|
|Dimensions||133.0 mm maximum length, 93.8 mm maximum width, 46.2 mm maximum height|
|Output Connector||3-pin XLRF-type |
Physical level: standard Ethernet
Dante network:Connector: single RJ45 | Cable quality: Shielded CAT5 or CAT6 recommended | Transmission speed: 100 Mbps
Trusted by industry professionals
Whether it’s on the boardroom table, the stage or in the studio, Audio-Technica products are trusted time and again by industry professionals looking for reliable, lovingly developed audio products for all budgets.
It’s Audio-Technica’s commitment to innovation, customer service and meticulous design that ensure professionals turn to us to provide solutions in conferencing, houses of worship, broadcasting, live sound, recording studios and beyond.
50 Years of Devotion to music
For over 50 years Audio-Technica has worked alongside leading figures in sports and music broadcast to develop and hone a range of products that deliver on the highest level.
Audio-Technica have developed and delivered products to power the Grammys, World Cup, Super Bowl, Commonwealth Games as well as every Summer and Winter Games from Atlanta 1996 to Sochi 2014.
A Legacy in Innovation
Founded in 1962 by Hideo Matsushita, Audio-Technica positioned itself immediately as a leader in the manufacture and design of innovative audio products.
Its expertise in innovation quickly spread to various new fields and led to the development of tone arms, microphones and headphones. Audio-Technica soon became a benchmark in those fields. Making history.
A self-made man and audiophile, Hidéo Matsushita was the former Director of the Tokyo Museum of Modern Art. It all started in his workshop, with the hand crafting of stereo cartridges. 50 years later, Audio-Technica has become a global leader in audio innovation.
A Passion for Listening
Humility, passion, creativity and expertise in sound are the core values behind Audio-Technica’s legacy, greatly inspired by its founder - whose imprint on the company’s philosophy is still felt today.
Audio-Technica’s passion for listening evolved in the 70’s, when it started designing headphones, building upon a legacy in innovation, meticulous engineering and artistic design.
Today, Audio-Technica’s audio products have become globally synonymous with consistently high sonic performance paired with impeccable build construction and artistic design.
One Year Limited Warranty
All Audio-Technica products come with a one year warranty as standard meaning you can enjoy your product safe in the knowledge that you’re covered.
All Audio-Technica products purchased from Audio-Technica Europe are guaranteed for one year from the date of purchase to be free of defects in materials and workmanship. In the event of such defect, the product will be repaired or replaced without charge*.
(* T&Cs apply)