Products Featured Products
3000-Series - Receiver
The ATW-R3210 receiver features automatic frequency scanning that eliminates the need for searching for clear channels by automatically selecting the most appropriate frequency for the area in which the wireless is operating. 25 kHz frequency spacing enables the system to easily find an open frequency in crowded RF environments, while pre-coordinated frequency scan groups simplify selection of usable frequencies in a multichannel wireless system. Once selected, frequencies can be synced with transmitters using the system’s IR sync functionality. The system’s squelch setting can be configured to automatically adjust to maximize range while minimizing potential interference. Advanced digital Tone Lock™ squelch provides enhanced rejection of interference. In addition, the Tone Lock signal from the transmitter also conveys information on the transmitter’s battery condition and mute status back to the receiver for display. The receiver’s dual-mode front panel display can switch between the standard view, which provides continuous indication of RF signal strength, frequency, mute status, audio modulation level of the received signal, and transmitter information, and a performance view, which highlights key metering. Settings can be easily adjusted using the control dial and BACK button located on the receiver’s front panel. Settings can also be locked to prevent them from being changed.
Operating on 12V DC, the receiver incorporates rear-panel connections for balanced XLR and unbalanced ¼" outputs, along with detachable BNC ¼" wave antennas. Switchable 12V DC antenna power is available on the BNC-type connectors for powered antenna accessories. The receiver is half-width for a standard 1U 19” rack-mount and includes rack-mount adapters.
- Extremely wide 60 MHz UHF tuning bandwidth for maximum versatility in an increasingly congested RF environment; available in 6 frequency bands - DE2 (470–530 MHz), EE1 (530–590 MHz), EF1 (590–650 MHz), FG1 (650–700 MHz), GH2 (795 – 806 MHz) and HH2 (821 – 865 MHz).
- True Diversity operation reduces dropouts
- Frequency scan and IR sync functionality for ease of setup
- Dual-mode receiver display can switch between standard view or a performance view that highlights key metering
- Receiver include OLED screens for optimal readout of key settings and alerts
- Antenna power available for powered antennas and other in-line RF devices
- Ground-lift switch helps eliminate audible hum caused by ground loops
- Balanced and unbalanced audio output jacks
|Operating Frequencies||Band DE2: 470.125 to 529.975 MHz |
Band EE1: 530.000 to 589.975 MHz
Band EF1: 590.000 to 649.975 MHz
Band FG1: 650.000 to 699.875 MHz
Band GH2: 794.100 to 805.900 MHz
Band HH2: 821.100 to 831.900 MHz and 863.100 to 864.900 MHz
Please note that some frequency bands might not be available in your territory or could come with a limited tuning bandwidth / transmitting power due to local regulations.
|Minimum Frequency Step||25 kHz|
|Maximum Deviation||ATW-T3201: ±38 kHz (THD:10%) |
ATW-T3202: ±36 kHz (THD:10%)
|Simultaneous Use||40 Channels per band* |
For assistance with multi-band operation or other frequency coordination issues, please contact your regional Audio-Technica customer service representitive. *Region and band dependent
|Frequency Response||ATW-T3201: 31 Hz to 15500 Hz |
ATW-T3202: 25 Hz to 16700 Hz
|Operating Range||100 m|
|Dynamic Range||ATW-T3201 Mic input: > 115 dB (A-weighted), typical |
ATW-T3201 Inst input: > 112dB (A-weighted), typical
ATW-T3202: > 115 dB (A-weighted), typical
|Total Harmonic Distortion||<1.0% (at 1 kHz, ±17.5 kHz deviation)|
|Operating Temperature Range||-5 ºC to +45 ºC|
|Receiving System||True Diversity|
|Sensitivity||20 dBuV at 60 dBA S/N ratio (50Ω termination)|
|Maximum Output Level||XLR / Balanced: +14 dBV |
6.3 mm (¼"") / Unbalanced: +8 dBV
|Antenna Input||BNC-type, 50 Ω|
|Power Output||12 V DC, 160 mA (combined)|
|Power Supply||100-240V AC (50/60 Hz) to 12V DC 1A (center positive) switched mode external power supply|
|Dimensions||210.0 mm x 191.0 mm x 43.4 mm (W x D x H)|
|Weight||1100 g, without accessories|
|Accessories Included||Two Flexible UHF antennas |
AC adapter (country dependent)
Rack Mount Adaptors
Trusted by industry professionals
Whether it’s on the boardroom table, the stage or in the studio, Audio-Technica products are trusted time and again by industry professionals looking for reliable, lovingly developed audio products for all budgets.
It’s Audio-Technica’s commitment to innovation, customer service and meticulous design that ensure professionals turn to us to provide solutions in conferencing, houses of worship, broadcasting, live sound, recording studios and beyond.
50 Years of Devotion to music
For over 50 years Audio-Technica has worked alongside leading figures in sports and music broadcast to develop and hone a range of products that deliver on the highest level.
Audio-Technica have developed and delivered products to power the Grammys, World Cup, Super Bowl, Commonwealth Games as well as every Summer and Winter Games from Atlanta 1996 to Sochi 2014.
A Legacy in Innovation
Founded in 1962 by Hideo Matsushita, Audio-Technica positioned itself immediately as a leader in the manufacture and design of innovative audio products.
Its expertise in innovation quickly spread to various new fields and led to the development of tone arms, microphones and headphones. Audio-Technica soon became a benchmark in those fields. Making history.
A self-made man and audiophile, Hidéo Matsushita was the former Director of the Tokyo Museum of Modern Art. It all started in his workshop, with the hand crafting of stereo cartridges. 50 years later, Audio-Technica has become a global leader in audio innovation.
A Passion for Listening
Humility, passion, creativity and expertise in sound are the core values behind Audio-Technica’s legacy, greatly inspired by its founder - whose imprint on the company’s philosophy is still felt today.
Audio-Technica’s passion for listening evolved in the 70’s, when it started designing headphones, building upon a legacy in innovation, meticulous engineering and artistic design.
Today, Audio-Technica’s audio products have become globally synonymous with consistently high sonic performance paired with impeccable build construction and artistic design.
One Year Limited Warranty
All Audio-Technica products come with a one year warranty as standard meaning you can enjoy your product safe in the knowledge that you’re covered.
All Audio-Technica products purchased from Audio-Technica Europe are guaranteed for one year from the date of purchase to be free of defects in materials and workmanship. In the event of such defect, the product will be repaired or replaced without charge*.
(* T&Cs apply)